The product
A heavy decorative finish carrying marble chips and sequins, supplied by weight rather than volume. At 1 m² per kg it is the most material-hungry finish in the range, and quantities need to be taken off carefully.
Where it is used
Substrates
Application data
Coverage, thickness, mix and cure, as declared by the manufacturer. Site conditions in the Gulf sit at the top of most of these ranges — allow for it in the programme.
Performance data
Every figure below is reproduced from the manufacturer's own technical data sheet, with the test standard it was measured against. The sheet itself is in the download section.
Where not to use it
The limits are as much a part of the specification as the performance. Everything here is stated on the manufacturer's data sheet.
Decorative finish: Giorgio Graesan Euphoria Bianco applied at 1 m²/kg over Primus [Sabbia / Naturale] base at 6–7 m²/L, to the approved sample panel. Insulating primer to all plasterboard substrates. Protective coat of [Vetro Lucido / Iper Vetro] where scheduled.
Square brackets mark the choices that belong to the project. Send us the finishes schedule and we will return the clause completed, with the sample and mock-up programme against it.
Documents
Every document is the manufacturer's own, reproduced in full and unaltered under our cover. Free to download, no form.
The rest of the
Technical support for the design team
We supply the material and we apply it, so the specification and the workmanship sit with one party. Send a finishes schedule, an elevation or a mood board and we will come back with the system, the build-up, the sample programme and a completed clause.