Skip to content
EARTH LAYERS Send your finishes schedule
Home / Specify / Resin-bound surfacing / Addaflex R UV
Addaset resin bound aggregate paving along the promenade at Lusail Boulevard, Qatar
Resin-bound surfacing — technical data

Addaflex R UV

Resin bound rubber stone surfacing, UV-stable

Manufacturer Addagrip Terraco Ltd
Country of origin United Kingdom
System family Resin-bound surfacing
Supplied and applied by Earth Layers by Conmarble

The product

The UV-stable version of Addaflex R, binding either recycled rubber tyre chippings or EPDM chippings — so colour holds and the EPDM palette becomes available.

Where it is used

Play and recreation surfaces where colour must hold Pedestrian areas needing a softer surface Coloured EPDM surfacing

Substrates

Asphalt or concrete at 25 mm laid depth Compacted stone at 30 mm laid depth

Application data

Coverage, thickness, mix and cure, as declared by the manufacturer. Site conditions in the Gulf sit at the top of most of these ranges — allow for it in the programme.

Product 2K polyurethane resin for resin bound surfacing with rubber or EPDM chippings
Density 1.06 g/cm³
Application conditions +5 °C to 30 °C, maximum 80% relative humidity
Aggregate 2 – 5 mm, with recycled rubber tyre or EPDM chippings
Coverage at 25 mm on asphalt or concrete Silver Noir 50: 4.30 m² per batch · Silver Noir 75: 3.40 m² per batch
Coverage at 30 mm on compacted stone Silver Noir 50: 3.60 m² per batch · Silver Noir 75: 2.80 m² per batch
Full chemical cure 7 days
Packaging 6.5 kg, 7 kg and 8 kg units, and bulk
Storage Above 7 °C, 3 months unopened

Performance data

Every figure below is reproduced from the manufacturer's own technical data sheet, with the test standard it was measured against. The sheet itself is in the download section.

PropertyResultStandard
Laid depth 25 mm on asphalt or concrete; 30 mm on compacted stone Addagrip data sheet
UV stability UV-stable resin Addagrip data sheet
Full chemical cure 7 days Addagrip data sheet

Where not to use it

The limits are as much a part of the specification as the performance. Everything here is stated on the manufacturer's data sheet.

3 months shelf life unopened Not a substitute for a tested impact-attenuating safety surface unless separately specified as such
Specification clause

Rubber stone resin bound surfacing: Addagrip Addaflex R UV, UV-stable resin binding 2–5 mm aggregate with [recycled rubber / EPDM] chippings, laid 25 mm thick on asphalt or concrete, or 30 mm on compacted stone, to the approved sample panel. 7 days full chemical cure.

Square brackets mark the choices that belong to the project. Send us the finishes schedule and we will return the clause completed, with the sample and mock-up programme against it.

Documents

Every document is the manufacturer's own, reproduced in full and unaltered under our cover. Free to download, no form.

TECHNICAL DATA SHEET · 3 pp · 1 MB
Download (PDF, 1.0 MB)

The rest of the

Addaset Resin bound surfacing Addaset ECO Resin bound surfacing with recycled aggregate Addaset Non UVR Resin bound surfacing, non-UV-stable Addaset TP Polyurethane resin for tree pits Addacolor Coloured resin bound surfacing Addaflex R Resin bound rubber stone surfacing Stonebound UV Resin bound surfacing, UV-stable Stonebound Non UVR Resin bound surfacing, non-UV-stable Terrabase Resin bound surfacing, high permeability PU Addastone Resin bonded polyurethane surface dressing Addastone Thixotropic Agent Thickening filler

Technical support for the design team

We supply the material and we apply it, so the specification and the workmanship sit with one party. Send a finishes schedule, an elevation or a mood board and we will come back with the system, the build-up, the sample programme and a completed clause.

Send your finishes schedule Visit the showroom
Continue
Delivered projectsWhere this system is already installed.The specification hubEvery product, family and document in one place.Upload a scheduleSend a finishes schedule or bill of quantities for review.See it in personEvery range on real walls, by appointment.