The product
A water-based coating for acoustic ceilings that carries the colour. Applied correctly it does not reduce the acoustic absorption of the ceiling beneath it, which is what separates it from ordinary paint — and it is the route to restoring an existing acoustic ceiling rather than replacing it.
Where it is used
Substrates
Application data
Coverage, thickness, mix and cure, as declared by the manufacturer. Site conditions in the Gulf sit at the top of most of these ranges — allow for it in the programme.
Performance data
Every figure below is reproduced from the manufacturer's own technical data sheet, with the test standard it was measured against. The sheet itself is in the download section.
Where not to use it
The limits are as much a part of the specification as the performance. Everything here is stated on the manufacturer's data sheet.
Acoustic coating: Fellert Even Better Acoustical Coating by Styjl in colour [ref], applied by air-mix spray gun in two light passes over the Even Better acoustic plaster.
Square brackets mark the choices that belong to the project. Send us the finishes schedule and we will return the clause completed, with the sample and mock-up programme against it.
Documents
Every document is the manufacturer's own, reproduced in full and unaltered under our cover. Free to download, no form.
The rest of the
Technical support for the design team
We supply the material and we apply it, so the specification and the workmanship sit with one party. Send a finishes schedule, an elevation or a mood board and we will come back with the system, the build-up, the sample programme and a completed clause.
