The product
A hand-applied seamless sound-absorbing ceiling and wall system: an acoustical board of recycled fibre, an acoustical plaster of perlite and recycled cotton, and an acoustical coating that carries the colour. A fine open texture. There is no grid, no tile and no visible joint.
Where it is used
Substrates
Application data
Coverage, thickness, mix and cure, as declared by the manufacturer. Site conditions in the Gulf sit at the top of most of these ranges — allow for it in the programme.
Performance data
Every figure below is reproduced from the manufacturer's own technical data sheet, with the test standard it was measured against. The sheet itself is in the download section.
Where not to use it
The limits are as much a part of the specification as the performance. Everything here is stated on the manufacturer's data sheet.
Acoustic plaster: Fellert Even Better Sahara seamless acoustic plaster system by Styjl, comprising the Even Better acoustical board at [25 mm / 39 mm] fixed to the approved substrate with Even Better Board Adhesive or Spring Washers, Even Better acoustical plaster applied to the manufacturer's wet thickness, and Even Better Acoustical Coating in colour [ref], finished to the approved sample panel. Sound absorption NRC 0.95 at 39 mm to ASTM C423 type A mounting. Supply and application by Earth Layers by Conmarble as exclusive Middle East dealer for Styjl.
Square brackets mark the choices that belong to the project. Send us the finishes schedule and we will return the clause completed, with the sample and mock-up programme against it.
Documents
Every document is the manufacturer's own, reproduced in full and unaltered under our cover. Free to download, no form.
The rest of the
Technical support for the design team
We supply the material and we apply it, so the specification and the workmanship sit with one party. Send a finishes schedule, an elevation or a mood board and we will come back with the system, the build-up, the sample programme and a completed clause.